Loop Cleat Tensioner 3-6mm

Clamcleat Loop Tensioner. For ropes Ø 3 mm (1/8") to 6 mm (1/4"). Black color. UV stabilised nylon.

Rigged onto a rope, the CL223 is quick to tension, easy to adjust and release. Use to tension guy lines of antenna masts, wire antennas, on sports nets, covers, tents & canvas structures or boat covers. It can be used for suspending curtains and tensioning banners in a theatre. Is also ideal for holding small boat fenders.

Dimensions: 52 x 16 x 39 mm.

What is the difference between a "Line-Lok Tensioner" and a "Loop Tensioner"?

Loop tensioners (CL223, CL234) have a slot in their body into which the rope can be inserted from the side of the tensioner when in use. With Line-Lok Tensioners (CL266, CL260, CL276, CL271), the rope is threaded through the tensioner and therefore it is not possible to install the guyrope by simply wrapping it around the tensioner and snapping it onto the rope.

How long do cleats last?

This really depends on how cleats are used. We often see nylon cleats that are over 10 years old, when they have been used for light loads on control lines. However, tensioning a rope by dragging it back through the teeth will quickly burn out a nylon cleat. This is why alloy cleats were originally developed. Alloy cleats withstand this type of use, as long as the rope is clean. A dirty rope that is full of sand will wear out any fitting. Windsurfers and kitesurfers who have to rig on coral sand beaches certainly know that their equipment has a limited life. Hard anodised cleats have slightly better wear resistance than silver ones. Nylon cleats are completely resistant to salt water corrosion. They are also resistant to many acid and chemicals. Alloy cleats have "excellent” corrosion resistance. Hard anodised cleats have slightly better corrosion resistance than silver ones.

Review in RadCom 2020-09
This article is copyright of the Radio Society of Great Britain and reproduced with their kind permission.